|
|
|
Perform extremely repeatable, automated engine tests with rapid testing throughput and precision oil and coolant management.
|
 |
XConsole Data Acquisition System and NSCR Room System with SF-871 Water Brake Absorber - Two (2) XCart docking engine carts with removable drip tray and drain plug
- Floor mount docking cart alignment base
- SF-871 heavy-duty water brake absorber, 2,500 HP (1864 kW) rated capacity, outlet controlled, low-inertia, with 4-bolt servo valve
- Interface load cell, 1000 lb.-ft. (1356 N-m) capacity, temperature compensated (2,000 lb-ft. optional)
- Rotary electric throttle actuator system
- Engine Control Panel (starter, ignition, fuel pump controls with autoresetting fuse protection, LED's indicate on, or tripped relay status)
- Your choice of input shaft: 1.125" x 10-tooth spline, 1.375" x 10-tooth spline
- High performance fuel pump, two fuel regulators, 0-800 lb/hr (100 g/s)
- Convenient rail support system for integrated plumbing and cable routing
- Oil and Coolant heat exchangers, racing oil filter, oil and coolant flow turbines, pre-plumbed. Two thermocouples for temperature monitoring. Cooling system has air bleed bubble tower, quick disconnect lines, and quick fill provisions. Can be used with optional computerized temperature controls for automated control from console.
|
|
|
|
Print Friendly
|
Home
