Your browser does not currently support JavaScript.

If your are using Netscape 2 or later then you can enable JavaScript.

Version 2 or 3: Choose Options|Network Preferences, choose the Languages tab, click Enable Javascript and then click OK.

Version 4: Choose Edit|Preferences|Advanced, click Enable JavaScript and then click OK.

With Internet Explorer 5: Go to Tools Menu|Internet Options, Security Tab and click on the Custom Level. Then select disable active scripting under the scripting section.
 
  
HomeWhat's New
Products
SupportCompanyLocatorMilitaryContact
 
 
 
Flowbenches
Dynamometers
 Torque Conv. Rebuild Drive Shaft Rebuild Data Acq. & Control Transmission Test
 
Engine
Introduction
SF-902
Introduction
Features
Pictures
Specifications
Racers Pack
NSCR
Eddy Current
Options
Chassis
Transmission
Towing
Brake
Torque Converter

Features
The SuperFlow SF-902 engine dynamometer can be upgraded as your needs change. Based on an interchangeable engine stand/docking cart, the SF-902 engine dynamometer is flexible to meet your testing needs. You choose to configure it as a mobile chassis style or docking cart.

The SF-902 can be equipped with your choice of consoles The SF-902 includes a robust data acquisition package with WinDyn software, with super-fast data collection coupled with easy to use pre-scripted testing profiles. Includes, integrated real-time weather station (air temperature, humidity, barometric pressure) System can run automated test cycles.

Engine control panel (starter, ignition, fuel pump controls with auto-resetting fuse protection, LED's indicate on, or tripped relay status)

Power absorbers (you choose one)
  • SF-833 water brake absorber, 1500 HP (1125 kW) rated capacity, outlet controlled, low inertia design with 4-bolt servo valve.
  • SF-871 water brake absorber, 2500 HP (1864 kW) rated capacity, outlet controlled, low inertia design with 4-bolt servo valve
Interface load cell, temperature compensated
  • 1,000 lb-ft (1356 N-m)
  • Optional 2,000 lb-ft (2711 N-m)
High performance fuel pump, two fuel regulators, 0-800 lb/hr (100g/s)

Single fuel flow measurement turbine, 0-400 lb/hr (50g/s)
  • Optional additional turbine, 0-120 GPH (0-480 ltr/hr) combined
  • Optional low-flow turbine
Oil pressure and single fuel pressure gauges on stand
  • Optional second fuel pressure gauge
Your choice of input shaft:
  • 1.125" x 10-tooth spline,
  • 1.375" x 10-tooth spline,
  • 1.125" x 26-tooth spline.
  • Custom
Cooling tower
  • Optional CT-600 Non-pressurized engine cooling tower
  • Optional CT-700 Pressurized engine cooling tower
16-channel temperature panel and 4 open-tip thermocouples, 4 - 10' (3.04 m) extention cables, 4 swage locks
  • Optional additional open-tip thermocouples
  • Optional additional closed-tip thermocouples
  • Optional extension cables
  • Optional additional swage locks
2-channel pressure panel with transducers: 0-150 psi, -30/+30 psi

Interconnect panel with 2 pre-configured analog voltage inputs (for lambda, etc.)

Your choice of Airflow measurement turbines with air temperature measurement sensor:
  • 9" (22.9 cm)
  • 6" (15.24 cm)
  • 4" (10.16 cm)
Mini tower computer system, 17" CRT monitor and color printer

2 days of on-site training (16 hours)*


* Travel costs, travel time and expenses not included.

Print Friendly

 

Ask a Question    Make a Suggestion   Request Printed Literature   Need Financing?
 
     
Engine Dynamometer - Chassis Dynamometer  - Transmission Dynamometer - Towing Dynamometer - Torque Converter Dynamometer
Flowbench - Torque Converter Rebuilding Systems - Drive Shaft Rebuilding Equipment  - Data Acquisition and Control  - Tester
COPYRIGHT © 2006 SuperFlow
Site designed and developed by 30dps