| Inertia values |
| Inertia Dynamometer | 450 lbs (205 Kg) |
| Eddy-current Dynamometer | 346 lbs (157 Kg) |
| Secondary roll, add | 314 lbs (143 Kg) |
| | |
| Rear-wheel power rating |
| Acceleration (inertia) | 500 hp (370 kW) |
| Steady-state (cold) | 500 hp (370 Kw) |
| Steady-state (3 min.) | 180 hp (120 Kw) |
| Steady-state (continuous) | 65 hp (45 Kw) |
| Steady-state (continuous with 1 blower) | 82 hp (65 Kw) |
| Steady-state (continuous with 2 blowers) | 100 hp (75 Kw) |
| | |
| Maximum roll speed | |
| | 200 mph (320 Kph) |
| Maximum axle load | |
| | 1,000 lbs (455 Kg) |
| Tracks with Secondary roll module |
| Roll tracking width, min/max. | 18"--70" (46--128 cm) |
Roll tracking width, min/max.
(with EC module between rolls) | 49"--101" (124--256 cm) |
| | |
| Power requirements |
| Inertia dyno only | 120 VAC, 15 amps or 240 VAC, 8 amps |
| EC dyno option | 240 VAC, 20 amps |
| | |
| Dimensions |
| Base dyno | 85" L x 36" W x 20.5" H
(216 x 91 x 52 cm) |
| Primary roll | 20" diameter x 16" wide
(51 x 41 cm) |
| Secondary roll | 20" diameter x 32" wide (51 x 81,2 cm) |
| Sensor box on rolling stand | 24" L x 24" W x 52" H (61 x 61 x 132 cm) |
| Eddy current module | 31" L x 22.75" W x 21.5" H
(79 x 58 x 55 cm) |
| Secondary 32" roll module | 44" L x 22.75" W x 20.25" H
(112 x 58 x 51 cm) |
Bike Lengths (front of front wheel to center of roll) |
| Standard CycleDyn | 58" to 84"
(147.3cm to 213.4cm) |
| Drag Pak Extension | 66" to 90"
(167.6cm to 228.6cm) |
| Weights (approximate) |
| Base dyno with standard inertia roll | 1,200 lbs (546 Kg) |
| Second 32" roll module | 425 lbs (194 Kg) |
| Eddy current module | 600 lbs (273 Kg) |
| Sensor box on rolling stand | 35 lbs (16 Kg) |
Home
