|
|
|
Engine and Chassis Dyno
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Sensor Box |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Analog Input Expansion Kit
|
- 8-channel analog voltage input panel
- Used to integrate exhaust gas analyzers, lambda sensors, O2 sensors
- Standard configuration: Seven 0-10 V channels and one 0-20 V channel
- Other configurations available upon request
- Choose 0-1 V, 0-5 V, 0-10 V, 0-20 V, or 0-30 V in any combination
- Cables not included; order below
Part No.: 1200A-2307
|
|
|
Cable Kit for Analog Panel
|
- 2462 is unterminated at one end with a red, black, and shield wire for the customer to wire into their analog device.
- 2462-01 is equipped with a BNC connector at the analog device end and a lemo connector at the sensor box end.
- X is the lemo color (choose black- 0, brown- 1, red- 2, yellow- 4, green- 5, blue- 6, or gray- 8, white- 9)
- Standard length is 10 ft. (3 m)
Part No:
1200A-2462-X
1200A-2462-01-X
|
|
|
Battery Voltage Input Cable
|
- Allows input of 0-20 VDC into sensor box for voltage monitoring
- Requires Analog Input Expansion Panel
Part No.:
1200A-2860
1200A-2188
|
|
|
Cable Kit for Remote Pressure Sensing
|
- This cable give you the ability to remote sense pressures using the sensors listed below
- Requires an analog expansion panel
- 15' cable length standard
Part No.: 1200A-2462-XC
|
|
|
Metal Pressure Transducer Kits
|
- Available in 0-150 psi, 0-300 psi 0-2,000psi
- Use for hydrocarbon pressures (oil, gas, etc.)
- 1/8" NPT fitting
Part No.s:
E1510P-5150 (0-150 psi)
E1510P-5300 (0-300 psi)
E1510P-5320 (0-2,000 psi)
|
|
|
|
Print Friendly
|
