|
|
|
Engine and Chassis Dyno
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Air/Fuel Monitoring |
|
|
|
|
|
|
|
|
Innovate Motorsports Air/Fuel meter kit for NGE systems
|
- Kit works with AutoDyn, CycleDyn, and XConsole systems equipped with 2 analog inputs or optional analog voltage input panel for multiple sensors
- Kit includes LM-1, interface cable with Grey Lemo connector, 110VAC power supply, installation instructions, and software
- Interconnect panel can be modified on some older NGE systems for an additional cost
- Can be used with weld in bungs or our tail pipe probe
- Includes 2 Lambda sensors
Part No.: 1200A-LM1
|
|
|
Innovate Motorsports Air/Fuel meter kit for the latest NGE systems
|
- Kit works with the latest AutoDyn, CycleDyn, and XConsole systems equipped with 2 analog inputs or optional analog voltage input panel for multiple sensors
- Kit includes LM-1, interface cable with AMP connector, 110VAC power supply, installation instructions, and software
- For current NGE systems utilizing the 2620 PCB
- Can be used with weld in bungs or our tail pipe probe
- Includes 2 Lambda Sensors
Part No.: 1200A-LM2
|
|
|
Complete Air/Fuel Meter Kit for NGE Systems
|
- Kit works with AutoDyn, CycleDyn, RaceDyn and XConsole systems equipped with our optional analog voltage input panel
- Kit includes AFM-1000 A/F meter, interface cable with brown Lemo connector, and installation instructions
- Interconnect panel can be modified on some NGE systems for an additional cost
Part No.: 1200A-NGE1000
|
|
|
Economical 5A, 12V single-channel power supply
|
- Includes 5A, 12V power supply for use with LM-1 or AFM 1000 Lambda kits
- Includes 120VAC power cord
Part No.: 4000P-16146
|
|
- Measure air/fuel data directly from the tailpipe
- Perfect for when you can not install a weld fitting directly in the exhaust pipe
- Kit includes sensor housing, and venturi vacuum pump
- Standard probe is 12 inches long (30.5 cm); extension probe is 18 inches long (45.72 cm)
- Requires regulated shop air 30psi max
- Works with AFM1000 or LM-1
Part No.: 1200A-EXH01
|
|
|
Innovate Motorsports Tail Pipe Probe
|
- Measure air/fuel data directly from the tailpipe
- Perfect for when you can't install a weld fitting directly in the exhaust pipe
- Kit includes sensor housing
- Best for automotive applications or open exhaust systems
- Works with AFM1000 or LM-1
Part No.: 1200A-EXH02
|
|
|
Weld in oxygen sensor bung
|
- Measure air/fuel data directly from the exhaust stream
- Weld fitting directly in the exhaust pipe for more accurate results
- Standard 18mm x 1.25 pitch bung
Part No.: 1400P-0063
|
|
|
Replacement UEGO Oxygen Sensor (AFM-1000)
|
- Direct replacement O2 Sensor for AFM-1000 Lambda kits
- Kit includes sensor housing, and (1) pre installed crush washer
- Standard 18MM x 1.25 threads
Part No.: 4000P-1000A-2
|
|
|
Replacement UEGO Oxygen Sensor (AFM-2000 & LM1)
|
- Direct replacement O2 Sensor for AFM-2000 and LM-1 Lambda kits
- Kit includes sensor housing, and (1) pre installed crush washer
- Standard 18MM x 1.25 threads
Part No.: 4000P-2010
|
|
|
|
Print Friendly
|
