Torque Converter Rebuilding Systems

Torque Converter Rebuilding Systems (TCRS®) from SuperFlow® are the choice of converter rebuilders worldwide for one reason, quality. The TCRS® system has been proven on more than 8-million torque converters and is in use at the big three automakers Ford®, General Motors® and Daimler Chrysler®. TCRS® sets the industry standard for precision alignment and is the only system available with all the tools to do the job right, with repeatability and precision within .001 of an inch. TCRS® representatives will not only help you select the correct equipment for your rebuilding goals, but also consult on the floor plan and staffing needs to make money rebuilding your own converters. Every situation is different, but as a general rule, if you’re purchasing six or more converters a day from an outside source an in-house converter rebuilding program from TCRS® will save you money.

TCRS® will provide a complete “turn key” system including support equipment such as work benches and parts carts to satisfy the demands of the highest volume rebuilders. Or, you can consult a TCRS® representative to select a strategic set of equipment if your rebuild volumes do not require such an automated process.

TCRS Single Gun Torque Converter Welder

TCRS Single Gun Torque Converter Welder

The TCRS Single Gun Torque Converter Welder is the most popular welder on the market. This vertical welder automates the critical phase of precision alignment and seamless welding of torque converters.

View Product

TCRS Dual Gun Torque Converter Welder

TCRS Dual Gun Torque Converter Welder

The TCRS Dual Gun Torque Converter Welder brings maximum productivity to your converter operation with twice the output rate of the single gun welder.

View Product

TCRS Torque Converter Balancer

TCRS Torque Converter Balancer

The TCRS Automatic Torque Converter Balancer features automatic weight indexing to provide accurate, repeatable balancing in as little as 45 seconds.

View Product

TCRS Piston Bonder

TCRS Piston Bonder

The TCRS Piston Bonder has massive capacity to accommodate the increasingly larger pistons found in today's torque converters. It's fast too, with the ability to bond most lock-up pistons and front covers every eight minutes.

View Product

TCRS Air Test Stand

TCRS Air Test Stand

The TCRS Air Test Stand inspects for leaks in seconds by pressurizing and submerging the torque converter under water to check for leaks.

View Product

TCRS 1860 Lathe

TCRS 1860 Lathe

The TCRS Victor 1860 lathe is the first step in the TCRS system, used to cut open the torque converter.

View Product

TCRS Conveyor Parts Washer

TCRS Conveyor Parts Washer

One of the biggest and best on the market, the TCRS Conveyor Parts Washer gives you a fast, economical solution for high volume parts cleaning.

View Product

TCRS Hub Run Out Tester

TCRS Hub Run Out Tester

The TCRS torque converter hub run out tester lets you check converter run out before they are installed in the transmission to reduce comebacks.

View Product

TCRS End Play Gauge

TCRS End Play Gauge

The TCRS torque converter end play gauge checks internal clearances of most torque converters before it's installed in the transmission. It's affordable, preventing one come back pays for the end play gauge.

View Product
CALL US TODAY
(888)442-5546
CLICK FOR MORE CONTACT OPTIONS