CycleDyn
High-performance Motorcycle, ATV and Kart Dynamometer
The SuperFlow CycleDyn motorcycle chassis dyno is used worldwide by motorcycle dealerships, educational institutions, and professional race teams to test motorcycles, karts, ATVs (quads), and similar vehicles within a safe, controlled environment. It is rated for 750+ hp (inertia), 500+ hp (eddy-current) and 200mph. The CycleDyn utilizes an ALL NEW netbook controller that makes it very easy to use. With the new controller, users can run the motorcycle dyno and the tuning software of their choice simultaneously. The CycleDyn is available as inertia only, with eddy-current load, or with eddy-current load and an AC motor. Loaded models also perform inertia only runs, giving users the capabilities of two dynos in one unit.
Because it is manufactured by SuperFlow, the CycleDyn delivers on both price and quality. This motorcycle dyno is not constructed with a cheap angle iron frame wrapped in thin sheet metal. Instead, we use sturdy steel plates and weld them at the seams to create a strong, vibration resistant enclosure. The CycleDyn comes standard with a motorized front wheel restraint that accepts motorcycles with wheelbases from 48”- 72” (122 – 183cm) and an air-actuated front wheel clamp. It also comes standard with a temperature compensated load cell (eddy-current models) for precise torque measurement during loaded testing. Also standard is a complete data acquisition and control system that includes with our industry leading WinDyn software. With all these features standard, the only thing that should surprise you about the CycleDyn is the price: SuperFlow quality and eddy-current load are now available for only $19,950. So, whether you want to add a profit center to your business, justify customer purchases, or increase the on-track performance of your race motorcycles, the CycleDyn high-performance motorcycle chassis dynamometer can handle it.
Typical applications include:
- Racing
- Performance testing and tuning
- Research and Development
- Diagnostics
- Durability and quality control
- Emissions and fuel consumption testing
- Education
- Vehicle certification
Use the CycleDyn to:
- Test safely in a controlled environment
- Justify customer accessory purchases with dyno-proven performance gains
- Locate and troubleshoot engine and driveline problems and verify that the problems were corrected
- Use CycleDyn test income to add a profit center to your business
- Use the handheld remote control for all phases of setup and testing while seated on the bike
- Collect volumes of data with the roll-around sensor stand's inputs for temperatures, pressures, air flow and fuel flow
- Prevent tire damage with the large 20" diameter, diamond-knurled roll which minimizes heat losses induced by tire deflection and enhances dynamometer repeatability
- Inertia values
- Standard roll ............................................. 280 lbs (128 Kg)
- Heavy roll .................................................. 450 lbs (205 Kg)
- Eddy current absorber effective inertia ......... 43 lbs (20 Kg)
- Rear-wheel power rating
- Inertia (traction limited)........................................................ 750 hp (555 kW)
- Eddy-current-absorber.......................... 500 hp @ 80 mph (370 kW @ 130 Kph)
- Tracks with Secondary roll module
- Roll min/max. tracking width .............. 16"-64" (44-163 cm)
- Roll min/max. tracking width
(with EC module between rolls) .... 49"-97" (124-246 cm)
- Power requirements
- Inertia dyno only ... 120 VAC, 15 amps or 240 VAC, 8 amps
- EC dyno option ...................................... 240 VAC, 30 amps
- Dimensions
- Base dyno ........ 85" L x 36" W x 20.5" H (216 x 91 x 52 cm)
- Primary roll ............... 20" diameter x 16" wide (51 x 41 cm)
- Secondary roll ........... 20" diameter x 32" wide (51 x 81 cm)
- Sensor box on rolling stand ............... 24" L x 24" W x 52" H (61 x 61 x 132 cm)
- Eddy current module.................. 33" L x 22.75" W x 21.5" H (79 x 58 x 55 cm)
- Secondary 32" roll module ....... 44" L x 22.75" W x 20.25" H (112 x 58 x 51 cm)
- Weights (approximate)
- Base dyno with standard inertia roll ...... 1,200 lbs (546 Kg)
(with heavy inertia roll) ........................ 1,500 lbs (682 Kg) - Second 28” roll module ............................ 425 lbs (194 Kg)
- Eddy current module ................................. 600 lbs (273 Kg)
- Sensor box on rolling stand .......................... 35 lbs (16 Kg)
- Base dyno with standard inertia roll ...... 1,200 lbs (546 Kg)
