SuperFlow Dynamometers and Flowbenches

CycleDyn

The SuperFlow CycleDyn motorcycle chassis dyno is used worldwide by motorcycle dealerships, educational institutions, and professional race teams to test motorcycles, karts, ATVs (quads), and similar vehicles within a safe, controlled environment. It is rated for 750+ hp (inertia), 500+ hp (eddy-current) and 200mph. The CycleDyn utilizes an ALL NEW netbook controller that makes it very easy to use. With the new controller, users can run the motorcycle dyno and the tuning software of their choice simultaneously. The CycleDyn is available as inertia only, with eddy-current load, or with eddy-current load and an AC motor. Loaded models also perform inertia only runs, giving users the capabilities of two dynos in one unit.

Because it is manufactured by SuperFlow, the CycleDyn delivers on both price and quality. This motorcycle dyno is not constructed with a cheap angle iron frame wrapped in thin sheet metal. Instead, we use sturdy steel plates and weld them at the seams to create a strong, vibration resistant enclosure. The CycleDyn comes standard with a motorized front wheel restraint that accepts motorcycles with wheelbases from 48”- 72” (122 – 183cm) and an air-actuated front wheel clamp. It also comes standard with a temperature compensated load cell (eddy-current models) for precise torque measurement during loaded testing. Also standard is a complete data acquisition and control system that includes with our industry leading WinDyn software. So, whether you want to add a profit center to your business, justify customer purchases, or increase the on-track performance of your race motorcycles, the CycleDyn high-performance motorcycle chassis dynamometer can handle it.

Typical applications include:

  • Racing
  • Performance testing and tuning
  • Research and Development
  • Diagnostics
  • Durability and quality control
  • Emissions and fuel consumption testing
  • Education
  • Vehicle certification


CONTACT US

CycleDyn Specifications

Inertia Values
Standard roll 280 lbs (128 Kg)
Heavy roll 450 lbs (205 Kg)
Eddy current absorber effective inertia 43 lbs (20 Kg)
Rear-wheel power rating
Inertia (traction limited) 750 hp (555 kW)
Eddy-current-absorber 500 hp @ 80 mph (370 kW @ 130 Kph)
Maximum roll speed 200 mph (320 Kph)
Maximum axle load 1,000 lbs. (355 Kg)
Tracks with Secondary roll module
Roll min/max. tracking width 16"-64" (44-163 cm)
Roll min/max. tracking width (with EC module between rolls) 49"-97" (124-246 cm)
Power requirements
Inertia dyno only 120 VAC, 15 amps or 240 VAC, 8 amps
EC dyno option 240 VAC, 30 amps
Dimensions
Base dyno 85" L x 36" W x 20.5" H (216 x 91 x 52 cm)
Primary roll 20" diameter x 16" wide (51 x 41 cm)
Secondary roll 20" diameter x 32" wide (51 x 81 cm)
Sensor box on rolling stand 24" L x 24" W x 52" H (61 x 61 x 132 cm)
Eddy current module 33" L x 22.75" W x 21.5" H (79 x 58 x 55 cm)
Secondary 32" roll module 44" L x 22.75" W x 20.25" H (112 x 58 x 51 cm)
Weights (approximate)
Base dyno with standard inertia roll 1,200 lbs (546 Kg)
(with heavy inertia roll) 1,500 lbs (682 Kg)
Second 28” roll module 425 lbs (194 Kg)
Eddy current module 600 lbs (273 Kg)
Sensor box on rolling stand 35 lbs (16 Kg)


CONTACT US

SuperFlow offers all the optional equipment you could need

Analog Panel


Analog Panel

8 channel analog panel to integrate exhaust gas analyzers lambda sensors, O2 sensors, etc. Select 0-1V, 0-5V, 0-10V, 0-20V or 0-30V in any combination.


Pressure Sensor Expansion Panels


Pressure Sensor Expansion Panels

The modular sensor box allows for additional 10-channel pressure panels and additional 16-channel temperature panels. Extra transducers are sold separately.


Drag Pack Extension


Drag Pack Extension

Perfect for choppers and drag bikes, the Drag Pack Extension is available in two lengths to accommodate wheelbases from 66” to 104” or 66” to 120”


ATV Roll


ATV Roll

The ATV Roll attaches to either side of the CycleDyn base (or to the eddy current for extra wide applications) to accommodate ATVs, legends cars, dwarf cars and go karts. It is 20” in diameter, 32” wide and knurled like the base CycleDyn roll for excellent traction.


Tailpipe Air Fuel Probe


Tailpipe Air Fuel Probe

SuperFlow tailpipe exhaust probes measure the air/fuel ratio directly from tailpipe. Tailpipe probes integrate with WinDyn for live monitoring and easy post test graphing and analysis.


Ramp Kits


Ramp Kits

Aluminum ramp kits are available for above ground installations. The 36” wide ramp is available in 72” or 94” lengths to accommodate low profiles and long vehicle.


AC Motoring Cube


AC Motoring Cube

The AC Motoring Cube brings emissions level test data the CyleDyn. It allows you to perform R&D economically prior to final certification. The AC cube will simulate inertia; AC cube will simulate inertia, rolling losses and aerodynamic effects with the help of an advanced motor controller and WindDyn. Perform coast downs and evaluate parasitic losses or use SuperFlow’s drivers trace software to perform emissions drive cycles.


ATV Deck


ATV Deck

The ATV Deck mounts to the front of the ATV Roll to accommodate ATVs, legends cars, dwarf cars and go karts. It’s available in standard length to match a standard CycleDyn or extended length for customers using the drag pack.




CONTACT US

WINDYN®

SuperFlow’s WinDyn Software is simply the most feature rich software for engine dynamometers today. We’ve included all the tools you need to make a SuperFlow engine dynamometer a successful piece of your business. WinDyn is preconfigured with industry standard tests to get you up and running quickly. But, we didn’t stop there…. We’ve also included powerful configuration and test editors that offer you complete, customized control of the dynamometer, the test cell and the tests you’re running. WinDyn’s available 139 data channels let you measure and analyze data to make your products better. The advanced data acquisition system samples data at 1,000 Hz while WinDyn displays it at 100 lines per second so you’re sure to see exactly what’s happening with the vehicles your testing. WinDyn’s built in data analysis tools let you see data in a way that makes sense, and like the rest of WinDyn, data analysis is user-configurable should you want to change the graphs, plots or overlays. The bottom line is that WinDyn gives you all the tools to make your products thrive.

Download a WinDyn Demo. WinDyn Software Demo**   (69.3 MB)

WinDyn Screenshot


CONTACT US

To learn more about the CycleDyn , the available options, or any of SuperFlow® wide range of products call 1-888-442-5546 or fill in the form below.