Sensor Box

Analog Input Expansion Kit

• Eight-channel analog voltage input panel
• Used to integrate exhaust gas analyzers, lambda sensors, O2 sensors
• Standard configuration: Seven 0-10 V channels and one 0-20 V channel
• Other configurations available upon request
• Choose 0-1 V, 0-5 V, 0-10 V, 0-20 V, or 0-30 V in any combination
• Cables not included; order below

Part No.: 1200A-2307

Cable Kit for Analog Panel

• 2462 is unterminated at one end with a red, black, and shield wire for the customer to wire into their analog device
• 2462-01 is equipped with a BNC connector at the analog device end and a LEMO connector at the sensor box end
• X is the LEMO color; choose Black (0), Brown (1), Red (2), Yellow (4), Green (5), Blue (6), Gray (8), White (9)
• Standard length is 10 ft. (3 m)

Part Numbers:

• 1200A-2462-X
• 1200A-2462-01-X

---

Battery Voltage Input Cable

• Allows input of 0-20 VDC into sensor box for voltage monitoring
• Requires analog input expansion panel

Part Numbers:

• 1200A-2860
• 1200A-2188

---

Cable Kit for Remote Pressure Sensing

• Use this cable to remote-sense pressures using the sensors listed below
• Requires an analog expansion panel
• 15' cable length standard

Part Numbers:

• 1200A-2462-XC
• 1200A-2307

Metal Pressure Transducer Kits

• Available in 0-150 psi, 0-300 psi 0-2,000 psi
• Use for hydrocarbon pressures (oil, gas, etc.)
• 1/8" NPT fitting

Part Numbers:

• E1510P-5150 (0-150 psi)
• E1510P-5300 (0-300 psi)
• E1510P-5320 (0-2,000 psi)